O-3046-115 - SEE-THROUGH OIL FILTER. DRY-SUMP 4in (115 MICRON) UP TO 60wt OIL. AN16

-Machined out of 6061-T6 billet aluminum.
-Clear anodized for protection and durability.
-Sight windows are 1/2in thick high-grade poly carbonate that is chemical, heat, and scratch resistant.
-Elements are stainless steel mesh that can easily be cleaned and reused.

Note: Assemblies are equipped with a pressure relief valve and are designed for engines with a max pressure of 350 psi and a max working temp of 400 degrees Fahrenheit.

This 4in filter assembly is for dry sump systems and fluid systems using #16 feed lines. These filters have #16 threaded inlet and outlet ports. For use between the dry sump oil pump and the dry sump tank. Having a see through filter before the dry sump tank allows only filtered oil into the tank, which will keep the tank clean and prevent contaminants from going through the pressure side of the dry sump pump. This is also the best place to install a see through filter when the dry sump tank has a flat bottom. Because the particles and contaminants that go into a flat bottom dry sump tank sometimes will settle to the bottom and not be sucked out of the tank and into the filter showing there is a problem in the engine.

This filter uses #16 O-Ring Boss fittings and has 2 inlets and 1 outlet opening.

Mounting Bracket: Flat Surface Mounting Bracket p/n O-3020 (Included)

Dimensions: 5 x 6in. 3.5in tall

Weighs 3.2lbs