T-1134 - TOP DEAD CENTER CHECKER - HEMI

Wanna check your top-dead center like a pro? Then grab one of these.

Simply follow these instructions:

1. Remove the spark plug of cylinder #1.
2. Lubricate the threads of the TDC Indicator with light oil.
3. Install the tool in the spark plug hole and tighten until snug.
4. Now rotate the engine noting the highest point the piston travels by watching the graduation marks on the indicator gauge.
5. Continue rotating until it drops .010. Make a mark on your Crank Hub
6. Rotate the opposite direction until it drops to 010 again. Make a 2nd mark on your Hub.
7. TDC is halfway between your two marks.

A real time saver when trying to dial in a magneto or camshaft at the track.

Fits Early & Late model HEMI. Just be careful if you loan this tool out, you may never get it back!