E-34-500 - ADJUSTABLE BELL CRANK ASSEMBLY - UNIVERSAL

Bell crank is machined from billet aluminum and is universal. Great for custom linkage applications. Mounting hole must be drilled and tapped. The arms are tapped with 10-24 threads.

The design allows for adjusting the arms in ten degree increments. The Bellcrank body has nine equally spaced, threaded holes. The arms have twelve equally spaced, thru holes. The arms are attached to the body with three screws per arm. Attach one arm to the body. On the opposite side of the body, rotate the arm to the desired angle. With the arm in this position, there will be three threaded holes that line up with three thru holes in the arm. Attach the three screws into the body. Loc-Tite can be used for added protection against vibration.